Quartet® Adjustable Partition Hanger

Comments about Quartet� Adjustable Partition Hanger:

Do not buy this. This will not hold up a whiteboard over your cubicle. If this was made of the same material the brackets are made from that come with the Quartet whiteboard then maybe it would work. Otherwise it is a COMPLETE waste of money.

Comments about Quartet� Adjustable Partition Hanger:

I bought a 3'x4' Quartet aluminum framed whiteboard to go over a cubicle wall. Since this product's specs didn't mention anything about how much weight it would hold, I bought this to go along with it. I could see from the picture and description that it was a plastic casing over metal hangers, so figured it should work.

The screws in both hangers weren't threaded and it took me (and 2 other guys) about an hour to get the screws out to adjust for the cubicle wall. The whiteboard just hangs on the ledge, so there really isn't much installation. However, after my employee went to erase the whiteboard, the back/forth movement was enough to destabilize it slightly and the entire metal hanger bent down, dropping the whiteboard to the floor.

Not sure how this would work on smaller whiteboards, but maybe something lighter than the Quartet 3'x4' size.

Comments about Quartet� Adjustable Partition Hanger:

It's a shame these aren't stocked in the stores. I work in a cubicle which makes wall mounting impossible and these hangers are perfect for my needs. They work especially well with the Quartet line of bulletin boards since the boards already have the mounting brackets installed.

Comments about Quartet� Adjustable Partition Hanger:

These hangers do not hang tightly over the cubicle walls. They tilt forward when hanging a 3' x 4' board on them.

Comments about Quartet� Adjustable Partition Hanger:

Very disappointing. Looks substantial in pictures, but is very thin and flimsy. Do not trust this do hang anything heavy like a magnetic dry erase board. This design assumes a perfectly flat top partition; most are curved so this bracket does not lie flat. Hard to believe these two cheap little brackets cost twenty dollars; I expected more.

Comments about Quartet� Adjustable Partition Hanger:

This product is made of plastic and very low-grade metal. The plastic is not the issue. The metal is very thin and only suited for small, light-weight white boards. It is over priced and one could make a better hanger using raw material from a HomeLowes which is what I am going to do. It went into the trash day one.

Comments about Quartet� Adjustable Partition Hanger:

I purchased these to hang a 3 by 4 whiteboard of moderate weight on a cubicle at work. I would have hoped they would be a little sturdier for the price - [$]. They are easily adjustable and attach very easily. If they last, they are a winner. I just question the durability.

Comments about Quartet� Adjustable Partition Hanger:

Didn't fit my cubicle which is wide and has a rounded top. If you have a thinner, square-topped cube it might be fine. Not very strong which is an issue if you're thinking of hanging a big heavy framed 8x10 (which is what I was trying to do).

Comments about Quartet� Adjustable Partition Hanger:

wimpy, wimpy, wimpy

Comments about Quartet� Adjustable Partition Hanger:

I bought this product to display my MS in my cubicle and ended up having to use both hangers to hold the frame properly.