REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Works pretty well
Comments about Rediform® National Side Punched Analysis Pads, 4-Column:
I installed the Staples (made by Linksys) Hub and one of these outlets on my home network. Setup was very simple and fast. You just connect the Hub to a free router port, download the StaplesConnect app, power up the hub, and follow the instructions from the app.
I discovered one flaw. This is only a problem if you have just a single device connected to your hub. To move the hub to another network, after pairing the outlet, I reset the hub to factory default settings (using the app). I then tried the same set-up procedure on the second network. While the hub was fine, I could not connect to the outlet. The hub could not see it. It turns out I needed to delete the outlet (and all other devices) from the hub BEFORE resetting to factory default. As far as i can tell there is absolutely no way to delete the outlet after resetting the hub if you have just one device to connect to the hub. It's a catch-22 situation.
To solve the problem, I got another outlet switch, paired it to the hub and then deleted all connected devices, then re-paired the original outlet. I was going to return the second outlet but decided to keep it. They both work perfectly so far. One is connected to a solinoid switch which allows me to turn on my sprinklers from my phone and the other is used to turn on lights in an outside building from my house.
Can't find what you need? Contact Us
This Web site is intended only for use by U.S. residents.