TRIPP LITE Digital Metered PDU 8; Power Distribution Unit, 120V, PDUMH15AT

Input voltage: 100, 120, 127 V Frequency required: 50/60 hz Outlet connectors: 8 NEMA 5-15R 2 digit display reports output power consumption in amps Set of two 12 ft. / 3.6m NEMA 5-15P input cables support connection to separate primary and secondary power sources ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds

Product Information

Cable Length :

12 ft

Load Capacity :

1800 VA

Input Connector :

NEMA 5-15P

Connector Type :

8 NEMA 5-15R

Physical Characteristics

Size :

17 1/2 in Width X 14 1/2 in Depth X 1 3/4 in Height

Material :

Steel

Technical Information

Input Voltage :

100, 120, 127 V

Frequency :

60 Hz

Miscellaneous

Brand :

Tripp Lite

Country of Origin :

USA

Weight

Weight :

1.00 lbs. per Each